Ariens 927069-14532 Specifikace stáhnout pdf (Strana 17)

GB - 17

Adjusting Mower Deck Pitch

NOTE: The front blade cutting height should

be 1/16 – 3/8 in. (1.59 – 9.53 mm) lower than

the rear blade cutting height (figure 12).

1. With the end of the mower blade facing

forward, measure distance from bottom

of mower blade to the ground at front of

mower deck.

2. Turn mower blade180 degrees and

measure distance from bottom of mower

blade to the ground at rear of mower

deck.

3. Perform steps 4 through 6 if the

measurement is too high or too low.

4. Remove front trunnion and front lift link

from unit (figure 13).

• TO RAISE front of mower deck, turn

front trunnion clockwise several turns.

• TO LOWER front of mower deck, turn

front trunnion counterclockwise

several turns.

5. Install front trunnion and front lift link on

unit.

6. Check mower deck pitch.

• If mower blade pitch is not correct, go

to step 7.

• If mower deck pitch is correct, the

adjustment is complete.

7. Adjust deck lift rod (figure 14):

a. Remove trunnion from unit.

b. TO RAISE front of mower deck, turn

trunnion counterclockwise several

turns.

c. TO LOWER front of mower deck, turn

trunnion clockwise several turns.

d. Install trunnion on unit.

8. Check mower deck pitch.

• If mower blade pitch is not correct,

repeat steps 4 through 6.

• If mower deck pitch is correct, the

adjustment is complete.

Figure 12

OA0010

Mower Deck Shown From The Side

1. Mower Deck

2. Mower Blade

3. Front of Mower

Deck

4. Front Blade

Cutting Height

5. Ground

6. Rear Blade

Cutting Height

1

5

2

4

6

3

Figure 13

2

1

1. Front Trunnion

2. Front Lift Link

OE0034

Figure 14

1

2

1. Trunnion

2. Deck Lift Rod

OE0140

To Lower

Front of

Mower Deck

To Raise

Front of

Mower Deck

1 2 ... 12 13 14 15 16 17 18 19 20 21 22 ... 25 26

Komentáře k této Příručce

Žádné komentáře